HORIZONTAL HANGING STYLE INSECT LIGHT TRAPS
WITH INTERNAL COLLECTION DRAWERS

Horizontal Hanging Style Insect Light Trap Models protect exterior entries such as truck bays, rail docks, and personnel doors; ideal for high ceiling areas.

With nearly 360 degrees of insect attracting black light lamp emission, these hanging insect light traps (ILT) employ large electrical grids to dispatch flying insects. These units require minimal ceiling heights of 10.75 feet. Careful consideration of forklift traffic and material stacking should be made prior to installation of these electronic fly killers (EFK).

Series 399E / 312E | Series 494E | Series 894E | Series 599E


Series 1199E

Series 399E / 372E Insect Light Traps

Click on Image to Enlarge

Series 399E/312E insect light traps are primarily designed to protect single entry [man] door areas and areas with limited access. This horizontal hanging style EFK is ideal for use where flying insect populations are low to moderate.

Series 399E/312E
 Energy Efficient Model Numbers
Metal FinishUnited States
Aluminized Steel399EDGA
Stainless Steel399EDGS
Metal FinishCanada
Aluminized Steel312ECBDGA
Stainless Steel312ECBDGS
Black Light Lamps24 BL Unfiltered and 24B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 42 lb / 19.1 kg
Stainless Steel = 46 lb / 20.9 kg
Unit Dimensions26.0" Wide X 23.0" High X 6.25" Deep
(661.0 mm Wide X 584.2 mm High X 158.8 mm Deep)

Insect-O-Cutor Series 494E

Series 494E Insect Light Traps

Click on Image to Enlarge

Series 494E insect light traps protect single truck door areas. These mid-size horizontal models should be used where flying insect populations are high enough to be readily observable. (Not available in Canada.)

Series 494E
 Energy Efficient Model Numbers
Metal Finish 
Aluminized Steel494EDGA
Stainless Steel494EDGS
Black Light Lamps36 BL Unfiltered and 36B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 54 lb / 24.5 kg
Stainless Steel = 59 lb / 26.8 kg
Unit Dimensions38.0" Wide X 23.0" High X 6.25" Deep
(965.0 mm Wide X 584.2 mm High X 158.8 mm Deep)
Insect-O-Cutor Series 494E

Series 894E Insect Light Traps

Click on Image to Enlarge

Exclusive Energy Efficient - Warehouse Workhorse!

Series 894E insect light traps are equipped with three T8 black light insect attraction lamps. These versatile units may be ceiling hung, wall mounted, or placed on shelves, worktables, and other flat platforms. An included rear reflector should be used if the ILT is wall mounted. Safety guards, positioned in front, top, and back sides of the unit, promote multi-directional black light emission for greater flying insect attraction and elimination.

Series 894E
 Energy Efficient Model Numbers
Metal Finish 
Aluminized Steel894EDGA
Stainless Steel894EDGS
Black Light Lamps2- 36 BL Unfiltered and 1- 36B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 43 lb / 19.5 kg
Stainless Steel = 45 lb / 20.4 kg
Unit Dimensions42.0" Wide X 16.25" High X 6.5" Deep
(1067.0 mm Wide X 413.0 mm High X 165.1 mm Deep)
Series 599E

Series 599E Insect Light Traps

Click on Image to Enlarge

Series 599E insect light traps protect large exterior entryways (rail and truck doors); trash and garbage disposal areas; and areas with high levels of competing light. These horizontal style models should be used in areas where maximum flying insect elimination is required.

Series 599E/512E
 Energy Efficient Model Numbers
Metal FinishUnited States
Aluminized Steel599EDGA
Stainless Steel599EDGS
Metal FinishCanada
Aluminized Steel512ECBDGA
Stainless Steel512ECBDGS
Black Light Lamps48 BL Unfiltered and 48B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 68 lb / 31.0 kg
Stainless Steel = 73 lb / 33.0 kg
Unit Dimensions50.0" Wide X 23.0" High X 6.25" Deep
(1270.0 mm Wide X 584.2 mm High X 158.8 mm Deep)


Unit design features: Steel construction materials. Chrome plated safety guards (front and rear). Safety interrupt switch deactivates electrical current when guards are opened for servicing. Internal metal insect collection drawer. Spring loaded and fixed lamp holders for secure, safe, and easy lamp tube servicing. Side panel jacknuts (threaded holds) accommodate eye-bolts. Three-wire grounded cord and plug.



Insect-O-Cutor® Insect Light Traps

For use in areas where low lifetime cost insect light traps are preferred. Our wide range of models provides a variety of choice for almost any area within your facility … from warehouse load docks … to production areas … to labs … to even office areas. Insect-O-Cutor® insect light traps and glueboard flytraps incorporate state-of-the-art, energy-efficient components and black light insect attraction lamps that meet our stringent criteria.

Energy-efficient models are designed to comply with various energy conservation programs (LEED, Green-lights, EPACT). Electronic-ballasted units reduce overall electrical consumption while actually increasing light output by 8% to 15% per lamp due to increased operational efficiency. Less energy consumed … more insect attraction light emitted.

High performance ILT models, now discontinued, utilized ultra-high current circuitry to increase insect attracting black light emission. An Insect-O-Cutor® innovation, ultra-high current circuitry over-drove insect attraction lamps without shortening lamp life.

ALSO SEE: INSECT-O-CUTOR SYSTEM DESIGN