Fluorescent Lamp Mercury Statement

Insect-O-Cutor® Insect Electrocutors

For use in areas where insect electrocutors are preferred. Our wide range of models provides an excellent choice for use in any area of the facility..... from warehouse... to office area. Insect-O-Cutors® incorporate state-of-the-art design technology (Energy-Efficiency) and special black light lamps that meet our stringent criteria.

Energy Efficient (EE) Models are designed to comply with various energy compliance acts and energy conservation programs. Electronic-ballasted models reduce overall electrical consumption, while increasing light output by 8% to 15% per lamp due to increased operational efficiency. Less energy consumed… more insect attraction light emitted.

High Performance (HP) Models utilize Ultra High Current (UHC) circuitry to increase black light emission for flying insect attraction. An Insect-O-Cutor® innovation, our UHC circuitry overdrives the insect attraction lamps without shortening lamp life.

ALSO SEE: INSECT-O-CUTOR SYSTEM DESIGN

HORIZONTAL HANGING STYLE MODELS WITH INTERNAL COLLECTION DRAWERS

Series 399E / 312E | Series 494E | Series 894E | Series 599E

Horizontal Hanging Style Models are designed to protect exterior entries such as truck bays and personnel doors and are ideal for use in high ceiling areas. Flying insect attraction and elimination is achieved via a nearly 360 degree sphere of black light emission and the unit's massive killing grid. These units require minimum ceiling heights of 10.5 feet (3.2 meters) or more.

While it might be desirable to place these models at lower elevations, careful consideration should be given to allow for sufficient clearance of forklift traffic. Insect collection drawers in these models are concealed within the units.

Unit Design Features: Front and rear safety guards; safety switch interrupts electrical current when servicing unit; internal metal insect collection drawer; spring-loaded and fixed lampholder sets for simple lamp installation; three-wire grounded cord and plug. Jacknuts (threaded holes) on unit's side panels accommodate eyebolts. Heavy-duty transformer is shunt-protected.






Insect-O-Cutor Series 399E/372E


Series 399E / 372E

Click on Image for
An Enlargement


Series 399E/312E units are primarily designed to protect single entry [man] door areas and areas with limited access, these horizontal hanging style models are ideal for use where flying insect populations are low to moderate.

Series 399E/312E
  High Performance
Model Numbers		 Energy Efficient
Model Numbers
Metal Finish United States
Aluminized Steel 389DGA 399EDGA
Stainless Steel 389DGS 399EDGS
Metal Finish Canada
Aluminized Steel N/A 312ECBDGA
Stainless Steel N/A 312ECBDGS
Black Light Lamps 24 BL Unfiltered and 24B BLB Filtered
Gross Weight of
Specific Models		 Aluminized Steel = 42 Lbs. / 19.1 KG
Stainless Steel = 46 Lbs. / 20.9 KG
Unit Dimensions 26.00" Wide X 23.0" High X 6.25" Deep
(661.0 mm Wide X 584.2 mm High
X 158.8 mm Deep)
Packed Carton 3.4 Cubic Feet / 0.1 Cubic Meters




Insect-O-Cutor Series 494E


Series 494E

Click on Image for
An Enlargement



Series 494E units are primarily designed to protect single truck door areas. These mid-size horizontal models should be used where flying insect populations are high enough to be readily observable. (Not available in Canada.)

Series 494E
  High Performance
Model Numbers		 Energy Efficient
Model Numbers
Metal Finish United States
Aluminized Steel 492DGA 494EDGA
Stainless Steel 492DGS 494EDGS
Black Light Lamps 36 BL Unfiltered and 36B BLB Filtered
Gross Weight of
Specific Models		 Aluminized Steel = 54 Lbs. / 24.5 KG
Stainless Steel = 59 Lbs. / 26.8 KG
Unit Dimensions 38.00" Wide X 23.0" High X 6.25" Deep
(965.0 mm Wide X 584.2 mm High
X 158.8 mm Deep)
Packed Carton 5.3 Cubic Feet / 0.15 Cubic Meters


Insect-O-Cutor Series 894E


Series 894E

Click on Image for
An Enlargement


Exclusive Energy Efficiency - Warehouse Workhorse!

Serie 894E is equipped with three T8 black light insect attraction lamps. These versatile units may be ceiling hung, wall mounted, or placed on shelves, counters, worktables, and other flat platforms. The backplate accessory should be used if the unit is wall mounted. Safety guards, positioned in front, top and back sides of the unit, promote multi-directional black light emission offering greater flying insect attraction and elimination.

Series 894E
  High Performance
Model Numbers		 Energy Efficient
Model Numbers
Metal Finish United States and Canada
Aluminized Steel N/A 894EDGA
Stainless Steel N/A 894EDGS
Black Light Lamps 2- 36 BL Unfiltered and 1- 36B BLB Filtered
Gross Weight of
Specific Models		 Aluminized Steel = 43 Lbs. / 19.5 KG
Stainless Steel = 45 Lbs. / 21.3 KG
Unit Dimensions 42.00" Wide X 16.25" High X 6.5" Deep
(1067.0 mm Wide X 413.0 mm High
X 165.1 mm Deep)
Packed Carton 3.96 Cubic Feet / 0.112 Cubic Meters


Insect-O-Cutor Series 599E/512E


Series 599E

Click on Image for
An Enlargement


Series 599E units are primarily designed to protect exterior entryways (rail and truck doors); trash and garbage disposal areas; and areas with high levels of competing light, these horizontal style models should be used in areas where maximum flying insect elimination is required.

Series 599E/512E
  High Performance
Model Numbers		 Energy Efficient
Model Numbers
Metal Finish United States
Aluminized Steel 589DGA 599EDGA
Stainless Steel 589DGS 599EDGS
Metal Finish Canada
Aluminized Steel N/A 512ECBDGA
Stainless Steel N/A 512ECBDGS
Black Light Lamps 48 BL Unfiltered and 48B BLB Filtered
Gross Weight of
Specific Models		 Aluminized Steel = 68 Lbs. / 31.0 KG
Stainless Steel = 73 Lbs. / 33.0 KG
Unit Dimensions 50.00" Wide X 23.0" High X 6.25" Deep
(1270.0 mm Wide X 584.2 mm High
X 158.8 mm Deep)
Packed Carton 6.6 Cubic Feet / 0.19 Cubic Meters


Privacy Statement | Directions to our Facility | Contact Us

1641 Lewis Way, Stone Mountain, GA, USA 30083-1107
Phone: (800) 966-8480               (770) 939-2835
Fax: (770) 621-0100




Copyright Insect-O-Cutor November 2006
Best With 1024 X 768 Screens