MULTI-MOUNT HORIZONTAL LOW HEADROOM
INSECT LIGHT TRAP MODELS

Multi-directional black light emission complements the multi-purpose design of Insect-O-Cutor low headroom insect light traps. Units may be either wall mounted or ceiling hung. Originally designed to fit between door jambs and ceilings, additional installations include low ceiling loading docks and temporary locations like job sites or processing pads and pavilions.

Series 2499E / 372E | Series 3694E | Series 4899E


Insect-O-Cutor Series 2499E/372E

Series 2499E Insect Light Traps

Click on Image to Enlarge

Series 2499E/372E insect light traps are primarily designed to protect single entry [man] door areas and areas with limited access. These horizontal hanging style models are ideal for use where flying insect populations are low to moderate.

Series 2499E/372E
 Energy Efficient Model Numbers
Metal FinishUnited States
Aluminized Steel2499EDGA
Stainless Steel2499EDGS
Metal FinishCanada
Aluminized Steel372ECBDGA
Stainless Steel372ECBDGS
Black Light Lamps24 BL Unfiltered and 24B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 32 lb / 14.6 kg
Stainless Steel = 33 lb / 15 kg
Unit Dimensions31.5" Wide X 12.0" High X 8.25" Deep
(800.0 mm Wide X 305.0 mm High X 210.0 mm Deep)
Insect-O-Cutor Series 3694E

Series 3694E Insect Light Traps

Click on Image to Enlarge

Series 3694E insect light traps may be ceiling hung; wall mounted; or placed on shelves, counters, worktables, and other flat platforms. Excellent for use over doorways! Stainless metal flange (safety retainer) latches guard open during maintenance.

Series 3694E
 Energy Efficient Model Numbers
Metal FinishUnited States
Aluminized Steel3694EDGA
Stainless Steel3694EDGS
Metal FinishCanada
Aluminized Steel3694ECBDGA
Stainless Steel3694ECBDGS
Black Light Lamps36 BL Unfiltered and 36B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 40 lb / 19.1 kg
Stainless Steel = 44 lb / 19.9 kg
Unit Dimensions43.5" Wide X 12.0" High X 8.25" Deep
(1105.0 mm Wide X 305.0 mm High X 210.0 mm Deep)
Insect-O-Cutor Series 4899E

Series 4899E Insect Light Traps

Click on Image to Enlarge

Series 4899E insect light traps, the largest in this series, may be ceiling hung, wall mounted, or placed on flat platforms. Stainless metal flange (safety retainer) latches guard open for routine maintenance. Not available in Canada.

Series 4899E
 Energy Efficient Model Numbers
Metal FinishUnited States
Aluminized Steel4899EDGA
Stainless Steel4899EDGS
Black Light Lamps48 BL Unfiltered and 48B BLB Filtered
Gross Weight of
Specific Models
Aluminized Steel = 57 lb / 25.9 kg
Stainless Steel = 63 lb / 28.6 kg
Unit Dimensions55.5" Wide X 12.0" High X 8.25" Deep
(1410.0 mm Wide X 305.0 mm High X 210.0 mm Deep)


Design features of the low headroom insect light trap include: Steel construction materials. Top, front, and rear chrome plated safety guards. Electrical safety switch deactivates current for service. Internal metal insect collection drawer. Removable rear reflector panel (for use when wall mounting). Spring loaded and fixed lamp holders for secure, safe, and easy lamp tube servicing. Top set jacknuts (threaded holes) and eye-bolts for ceiling hung installations. Non-abrasive foot pegs. Three-wire grounded cord and plug.



Insect-O-Cutor® Insect Light Traps

For use in areas where low life time cost insect light traps are preferred. Our wide range of models provides a variety of choice for almost any area within your facility … from warehouse load docks … to production areas … to labs … to even office areas. Insect-O-Cutor® insect light traps and glueboard flytraps incorporate state-of-the-art, energy-efficient components and black light insect attraction lamps that meet our stringent criteria.

Energy-efficient models are designed to comply with various energy conservation programs (LEED, Green-lights, EPACT). Electronic-ballasted units reduce overall electrical consumption while actually increasing light output by 8% to 15% per lamp due to increased operational efficiency. Less energy consumed … more insect attraction light emitted.

High performance ILT models, now discontinued, utilized ultra-high current circuitry to increase insect attracting black light emission. An Insect-O-Cutor® innovation, ultra-high current circuitry over-drove insect attraction lamps without shortening lamp life.

ALSO SEE: INSECT-O-CUTOR SYSTEM DESIGN